How to clean a lens step by step..

Our lenses should be cleaned regularly to ensure they are in optimal condition and to maximize their lifespan, as they can be used with any cameras we acquire.

So today we're going to list step by step how you should properly clean your lenses, telling you what you need and what the best way to do it is.

Things to keep in mind when cleaning a lens

You must carefully consider the place you choose to work; it should be very clean and well-lit. It's important that the workspace is completely clean and dust-free, as otherwise, the situation could worsen. You should absolutely avoid outdoor areas and places with drafts.

Good lighting is another key factor, because it allows you to be absolutely sure you're doing a good job. And you'll be able to examine the cleanliness of your lenses in detail.

What do you need?

It's very important to acquire the right materials for cleaning your lenses, as not having them risks damaging your equipment. Below, we've listed the most commonly used tools for this purpose.

The tools that usually make up the cleaning kit are: an air blower or bulb, a retractable brush, a microfiber cloth, isopropyl alcohol, and latex gloves.

The kit you can see in the photo is from Camkix and it is Available on Amazon for about €10.

How to carry out the cleaning?

Next, we will proceed step by step to clean our lenses. It is important that we carefully follow each step, using each tool as directed.

The first step. Blowing air.

For this step, we'll use the blower bulb. Always wearing latex gloves, we'll remove any dust particles that might be on the lens and could scratch it. To do this, we'll use the blower bulb, being careful not to place it directly on the lens. We'll hold the lens with one hand and the bulb with the other. We'll blow through the bulb, tilting it at about a 45-degree angle, starting from the center and working our way to the edges.

Once one side of the lens is clean, we will proceed to the opposite side, repeating the operation.

We must not forget that it is also important to clean the lens cap, so that any dirt that may be on it does not fall back onto the lens once we put it on.

Second step. Cleaning with the brush.

Once we've cleaned with compressed air, we move on to cleaning with the brush, paying special attention to the edges. We should use gentle, circular motions, always finishing on the outer edge, as we want to remove any dirt that may have accumulated on the edges.

This step must be performed on both sides of the lens, as well as on the caps and filters.

Third step. Chamois cloth and isopropyl alcohol

You must thoroughly inspect the lens before proceeding with this step, and be absolutely certain that there are no particles left on it. Otherwise, you could damage the lens.

Never spray alcohol directly onto the lens. Simply add a small amount to the cloth, and once it's slightly damp, proceed with cleaning. Always use small circular motions, working from the center outwards.

Once you have verified that there is no trace of dirt, use a second cloth to thoroughly dry both the lens and the cap and filters.

Now that you have your lenses cleaned, you just need to store them in a clean, dry place.

What you should never do

– You shouldn't touch it directly with your fingers, as you'll leave grease stains.

– Never use unsuitable fabrics like your own clothes, as you risk scratching the material.

– Using steam to clean the lens can be very dangerous, as moisture can seep inside the lens, causing fungus to grow inside.

– Be careful where you place your lenses; dirty surfaces can damage them. The same goes for sandy, damp, or other similar surfaces.

Remember, if you need more information, or wish to contact us, you can always do so through our contact form. contactOr through our phone: 96 546 18 62; We'd be happy to help you!

Seen in Dzoom